Raineon Connector

D38999/26MD35SN

Straight plug · Shell 15 · Insert 15-35 · 37 × size 22D socket · composite, nickel plated

Certificate of conformance includedTypical lead time 2–4 weeks

2–4 weeksstocked configurations24 hoursquotation turnaroundCoC includedbatch traceabilityMOQ 1 pcprototype friendly

Request a quote for D38999/26MD35SN

We manufacture D38999/26MD35SN to the dimensional and performance requirements of MIL-DTL-38999 and supply it as a drop-in equivalent. It fits the same panel cut-out, uses the same standard contacts, and is documented with a certificate of conformance and batch traceability. Typical lead time is 2–4 weeks for stocked configurations and 4–8 weeks for non-standard finishes, key positions or custom assemblies — instead of the 20–30 weeks common in the OEM channel.

Specifications

Part numberD38999/26MD35SN
Connector styleStraight plug — free-hanging straight plug with triple-start coupling nut
Series / specificationMIL-DTL-38999 Series III, triple-start threaded coupling, 100% scoop-proof
Shell size15 (designator D)
Coupling threadM22×1-6g
Insert arrangement15-35 per MIL-STD-1560
Contacts37 × size 22D
Contact typeSocket (female) contacts
Contact terminationCrimp, removable — SAE-AS39029 contacts (M39029/xx)
Contact current rating5 A per contact (size 22D)
Contact resistance≤ 12 mΩ (Ø0.76 mm) max
Service ratingService M
Test voltage1300 Vrms at sea level / 800 Vrms at 21,000 m
Insulation resistance≥ 5,000 MΩ at 500 VDC
Shell materialComposite — stainless steel (class K) and titanium alloy (class TA) shells available on request
Insulator materialThermosetting or thermoplastic
Seal materialSilicone rubber
Shell finishM — Electroless nickel over composite (class M)
Shell-to-shell continuity3 mΩ
Salt spray2000 h
Operating temperature−65 °C to +175 °C
Mating cycles500 minimum
SealingSealed mated pair, IP67 (1 m for 30 min, typical)
EMI / RFI shielding85 dB at 1 GHz
Key positionN (normal)
Mating halfD38999/20WD35PN — view page
Backshell threadMIL-DTL-85049 (for example M85049/38 straight, M85049/39 90°)
Environment noteCadmium-free, lightweight composite shell

Part number breakdown

D38999MIL-DTL-38999 circular connector family
/26Shell style: Straight plug
MShell finish: Electroless nickel over composite (class M)
DShell size 15
35Insert arrangement 15-35 (MIL-STD-1560) — 37 × size 22D
SSocket (female) contacts
NKey position N (normal)

Ordering a different finish, key position or contact style? Send the part number and we will confirm availability.

Cross reference

ManufacturerEquivalent line
Amphenol AerospaceTVS / TVP series (38999 Series III)
Eaton (Souriau)8STA / 851 series
Glenair233-105 COTS 38999
ITT CannonKJL series
Conesys / PEI-Genesissame slash-sheet callouts

Brand names and part numbers are the property of their respective owners and are shown for cross-reference only. Raineon products are manufactured to the dimensional and performance requirements of the applicable military specification and are offered as drop-in equivalents — they are not OEM-branded or OEM-supplied product.

Mating half

D38999/20WD35PN
wall-mount receptacle, pin (37 contacts)
Open the D38999/20WD35PN page →

Mating requires the same shell size and insert arrangement, opposite contact gender and the same key position. Finish class does not affect mating, but cadmium and nickel finishes are normally kept consistent across a mated pair for corrosion reasons.

Typical applications

  • Avionics and cockpit instrumentation harnesses
  • Flight-control and actuator looms
  • Engine-bay and airframe wiring where vibration and fluids are present
  • Military ground vehicles and shelter systems
  • Radar, ground support and test equipment
  • Industrial motion control and heavy equipment

Frequently asked questions

Is this a genuine Amphenol, Souriau or Glenair part?

No. Raineon is an independent connector manufacturer. Every part we ship is manufactured to the dimensional and performance requirements of MIL-DTL-38999 Series III and is offered as a drop-in equivalent — not an OEM-branded product. The brand names above are the property of their respective owners and are listed for cross-reference only.

What lead time can I expect?

Typically 2–4 weeks ex-works for stocked configurations, and 4–8 weeks for non-standard finishes, key positions or backshell assemblies. For comparison, 20–30 weeks is common in the OEM distribution channel for this shell size. Lead time depends on quantity and specification.

Does it come with a CoC and traceability?

Yes. Every shipment includes a certificate of conformance with date code and batch traceability. Dimensional inspection reports and material certificates are available on request.

Will my existing contacts and tooling work?

Yes. The connector accepts standard SAE-AS39029 (M39029/xx) size 22D contacts, so your existing crimp tooling (for example M22520/1-01) and insertion / extraction tools carry straight over.

What do I need to confirm to make sure it mates?

Four things: shell size, insert arrangement, key position, and opposite contact gender on the mating half. Send us your drawing or the mating part number and we will confirm the build before quoting.

What is the minimum order quantity?

One piece for prototypes and evaluation builds. Unit price steps down from 10, 50 and 100 pieces.

Related part numbers

Get a quotation

Send us the part number, quantity and required delivery date. We reply with price, lead time and available documentation within 24 hours — and we will confirm the mate against your drawing before the order is placed.

Request a quote for D38999/26MD35SN

Email sales@raineonconnector.com  ·  WhatsApp +86 18551752661

Raineon Connector · Nanjing Raineon Electronic Technology Co., Ltd. · https://www.raineonconnector.com. Specifications are indicative and subject to confirmation against the applicable detail specification and the part-specific datasheet. Reference to OEM brand names is for cross-reference only and does not imply affiliation, endorsement or OEM supply. Cadmium-plated finishes should be checked against local environmental restrictions before specification.

INQUIRY