J30J-21TJL
Plug with male pin contacts · 21 contacts · 1.27 mm pitch · free-end screw locking
Certificate of conformance includedTypical lead time 2–4 weeks
| 2–4 weeksstocked configurations | 24 hoursquotation turnaround | CoC includedbatch traceability | MOQ 1 pcprototype friendly |
Request a quote for J30J-21TJL
Specifications
| Part number | J30J-21TJL |
| Series | J30J micro-D / micro-rectangular |
| Equivalence | Manufactured to GJB2446A, the Chinese standard equivalent to MIL-DTL-83513 (Micro-D) |
| Housing | Metal shielded housing, construction equivalent to the MDM series |
| Contact pitch | 1.27 mm (0.050 in) |
| Contact grid | 1.27 mm × 2.54 mm |
| Contacts | 21 (the J30J family covers 9 to 144 contacts) |
| Contact type | Elastic stranded pin contacts (positive contacts) |
| Gender | Male pin contacts |
| Locking | free-end screw locking |
| Termination | Crimp · solder cup · straight PCB · right-angle PCB (selected by suffix) |
| Insulator | Thermosetting / thermoplastic |
| Contact material | Copper alloy, gold plated |
| Rated current | 3 A |
| Contact resistance | ≤ 10 mΩ |
| Insulation resistance | ≥ 5,000 MΩ at room temperature · ≥ 100 MΩ under humid conditions |
| Withstand voltage | 800 V |
| Operating temperature | −55 °C to +125 °C |
| Vibration resistance | 10 to 2,000 Hz, 196 m/s² |
| Shock / acceleration resistance | 735 m/s² |
| Mechanical life | 500 mating cycles |
| Salt spray | 96 hours |
| Locking screw torque | 0.15 to 0.2 N·m (9 to 100 contacts) · 0.2 to 0.3 N·m (144 contacts) |
| Sealed versions | J30JM gel-sealed (Q/21EJ61B) and glass-sintered seal (Q/21EJ1001) |
| Mounting hole spacing | identical to MIL-DTL-83513 |
| Shell finish | Nickel (standard) · cadmium available as suffix G |
| Mating half | J30J-21ZKP — view page |
Ratings above are the published J30J series values to GJB2446A. Request the part-specific datasheet for qualification and test data.
Cross reference
| Manufacturer | Equivalent line |
|---|---|
| ITT Cannon | MDM / MWDM / MDSM series |
| Glenair | Micro-D metal-shell series |
| TE / other | MIL-DTL-83513 slash sheets |
Brand names and part numbers are the property of their respective owners and are shown for cross-reference only. Raineon products are manufactured to the dimensional and performance requirements of the applicable military specification and are offered as drop-in equivalents — they are not OEM-branded or OEM-supplied product.
Mating half
Mating requires the same shell size and insert arrangement, opposite contact gender and the same key position. Finish class does not affect mating, but cadmium and nickel finishes are normally kept consistent across a mated pair for corrosion reasons.
Typical applications
- Dense signal interfaces on airborne and spaceborne electronics
- Board-to-cable and board-to-board runs where 1.27 mm pitch is required
- UAV and missile seeker electronics
- Medical, robotic and instrumentation equipment
- Direct replacement of MDM / MWDM / 83513 layouts
Frequently asked questions
Is this a drop-in replacement for MIL-DTL-83513 / MDM connectors?
Yes. J30J uses the same 1.27 mm contact pitch and the same 1.27 mm × 2.54 mm grid. Mounting hole spacing matches the MIL-DTL-83513 metal-shell footprint — on 15, 21, 25 and 31 way sizes it is identical; on 9 way it differs by 0.1 mm (14.4 mm against 14.3 mm), which is absorbed by the mounting hardware.
Which part number do I need for a plug and socket pair?
The TJL suffix is the plug with male pin contacts and free-end screw locking; the ZKP suffix is the receptacle with female socket contacts and fixed-end locking. Order both from this page to keep plating and contact alignment matched.
What termination options are available?
Crimp, solder cup, straight PCB and right-angle PCB versions. The termination is selected by the suffix after the contact count.
What is the lead time?
Typically 2–4 weeks ex-works for stocked contact counts and terminations, and 4–8 weeks for custom assemblies.
Can you supply pre-wired assemblies?
Yes. We build harness assemblies to your drawing, including wire, crimping, labelling, sleeving and continuity testing.
What is the minimum order quantity?
One piece for prototypes. Price breaks from 10, 50 and 100 pieces.
Related part numbers
- J30J-21ZKP receptacle with socket contacts (21 positions)
- J30J-25ZKP receptacle with socket contacts (25 positions)
- J30J-25TJL plug with pin contacts (25 positions)
- J30J-15ZKP receptacle with socket contacts (15 positions)
- J30J-15TJL plug with pin contacts (15 positions)
- J30J-31ZKP receptacle with socket contacts (31 positions)
Get a quotation
Send us the part number, quantity and required delivery date. We reply with price, lead time and available documentation within 24 hours — and we will confirm the mate against your drawing before the order is placed.
Request a quote for J30J-21TJL
Email sales@raineonconnector.com · WhatsApp +86 18551752661
Raineon Connector · Nanjing Raineon Electronic Technology Co., Ltd. · https://www.raineonconnector.com. Specifications are indicative and subject to confirmation against the applicable detail specification and the part-specific datasheet. Reference to OEM brand names is for cross-reference only and does not imply affiliation, endorsement or OEM supply. Cadmium-plated finishes should be checked against local environmental restrictions before specification.
